Methanol Institute Statement on Worldwide Fuel Charter

MI CEO Responds to Release of the 6th Edition WWFC Which Now Accepts the Blending of Methanol in Gasoline Where Specified by Applicable Standards

The continued perpetuation of biased misstatements contained in the WWFC about methanol are unfortunate.”

— Gregory Dolan, CEO, Methanol Institute

WASHINGTON, DC, UNITED STATES, October 31, 2019 /EINPresswire.com/ — Statement by Gregory Dolan, CEO, Methanol Institute

“The 6th edition of the Worldwide Fuel Charter (WWFC) was released this week offering the automakers’ recommendations for a harmonized global specification for gasoline. Previous editions of the Worldwide Fuel Charter suggested that methanol should not be permitted in gasoline. In response to detailed comments submitted by the Methanol Institute and other stakeholders, the 6th Edition WWFC now finds that methanol is acceptable for blending in gasoline where “specified by applicable standards,” using the example of the European Union’s allowance of up to 3% methanol by volume in gasoline under standard EN228.

“While we welcome the global automaker’s recognition that the blending of methanol in gasoline is allowed in countries around the world, the continued perpetuation of biased misstatements contained in the WWFC about methanol are unfortunate. In a section of the WWFC on ‘Oxygenates,’ the document raises concerns about the blending of methanol in gasoline based entirely on unpublished ‘non-confidential images/data used with Toyota’s permission.’ Contrary to the limited technical data presented in the WWFC, the Methanol Institute’s comments highlighted over 40 years of successful commercial experience with methanol/gasoline fuel blends.

“Our comments addressed technical and commercial concerns regarding materials compatibility, driveability, emissions, and fuel stability. Methanol’s physical properties – high octane, high heat of vaporization, high flame speed, and reduced engine knock – enhance gasoline and enable technologies for greater engine efficiency. Blending methanol into gasoline also reduces harmful vehicle exhaust emissions.

“While one goal of the WWFC is to specify a gasoline with lower carbon intensity, the document fails to note that methanol is being produced today from a wide range of conventional and renewable feedstocks. Methanol can be a future proof, low-carbon and high-octane gasoline blendstock for the global fleet of cars.”

About the Worldwide Fuel Charter: The WWFC is published by the European Automobile Manufacturers Association (ACEA), US Alliance of Automobile Manufacturers, US Engine Manufacturers Association, and Japan Automobile Manufacturers Association to “promote harmonized fuel quality worldwide.” In April, ACEA announced that the Worldwide Fuel Charter Committee was seeking comments on the proposed 6th edition of the Worldwide Fuel Charter.

About the Methanol Institute: As the trade association for the global methanol industry, the Methanol Institute (MI) represents world’s leading methanol producers, distributors and technology companies from its offices in Singapore, Washington, Brussels and Beijing. For the past 30 years, MI has worked to ensure the safe handling of methanol across the distribution chain, promote the growth of methanol as an essential chemical commodity and energy resource, and influence global regulatory and public policy initiatives that impact the methanol industry. More information about the Methanol Institute can be found here: https://www.methanol.org/

Gregory Dolan
Methanol Institute
+1 703-248-3636
email us here


Source: EIN Presswire

Intratec Reveals Calcium Carbonate Prices

Calcium carbonate historical prices in several countries are now accessible through online charts.

SAN ANTONIO, TX, UNITED STATES, October 30, 2019 /EINPresswire.com/ — Intratec Solutions LLC, a leading provider of independent reports examining production processes and critical data surrounding industry-related markets, is pleased to announce that its online database now covers calcium carbonate price histories.

Accessing online charts updated monthly, professionals interested in calcium carbonate pricing data can gain a solid understanding of price trends, in different global regions. The database covers calcium carbonate price histories in the USA, Europe, and Asia, from 2007 to the present.

A free sample is available at www.intratec.us/chemical-markets/calcium-carbonate-price

Intratec offers very cost-effective subscription plans, designed for not only professionals needing continuous access to calcium carbonate pricing data but also users with a sporadic need to access such information. Subscribers may export pricing data into Excel format.

Intratec also offers professional and up-to-date reports focused on calcium carbonate production costs, detailing capital investment and operating costs of calcium carbonate plants. For more information, visit: www.intratec.us/analysis/calcium-carbonate-production-cost

About Intratec Solutions LLC

Intratec (www.intratec.us) is a leading provider of market and technology intelligence for process industries. Our business is about providing up-to-date and independent analyses examining production processes, as well as critical data surrounding industry-related markets. Our portfolio covers +900 products, among reports and online databases, which provide key information related to process industries, spanning: petrochemicals; plastics, rubbers & fibers; inorganic chemicals; fertilizers; renewable chemicals; specialty chemicals and energy & utilities.

PR Team
Intratec Solutions LLC
7139844834
email us here


Source: EIN Presswire

Missouri US Navy Veterans Mesothelioma Advocate Now Urges a Navy Veteran with Mesothelioma in Missouri To Call for On the Spot Access to Attorney Erik Karst of Karst von Oiste-Get Honest Answers About Compensation

"If you are a Navy Veteran in Missouri with mesothelioma please call us anytime at 800-714-0303-we want you to get the best compensation results and we will not waste your time with nonsense.”

— Missouri US Navy Veterans Mesothelioma Advocate

KANSAS CITY, MISSOURI , USA, October 30, 2019 /EINPresswire.com/ — The Missouri US Navy Veterans Mesothelioma Advocate says, "When it comes to a US Navy Veteran with mesothelioma in Missouri, we believe the phrase 'show me' are super important when it comes to hiring a law firm to represent them. We are urging a Navy Veteran in Missouri or their family members to call us anytime at 800-714-0303 and we will try to provide on the spot access to attorney Erik Karst of the law firm of Karst von Oiste.

"Erik and his colleagues are responsible for over a billion dollars in mesothelioma or asbestos exposure compensation claims-and their top priority is seeing to it that Navy Veterans with mesothelioma receive the best possible financial compensation results. As we would like to discuss anytime at 800-714-0303 talking directly with attorney Erik Karst about mesothelioma compensation is a much better option than ordering a 'free' book, kit, or overnight package about mesothelioma-or contacting a 'claims center' that is not sponsored by the federal government." www.karstvonoiste.com/

The Missouri US Navy Veterans Mesothelioma Advocate is also warning a Navy Veteran with mesothelioma in Missouri to avoid hiring a local car accident lawyer to help a complex mesothelioma compensation claim. Doing this would be like hiring a local plumber to paint your house. The plumber might know a little about paint brushes or paint-but they would probably be clueless on the vital step by step process to get the job properly done. "If you are a Navy Veteran in Missouri with mesothelioma or their family members please call us anytime at 800-714-0303-we want you to get the best possible compensation results and we will not waste your time with nonsense." https://Missouri.USNavyMesothelioma.Com

The Missouri US Navy Veterans Mesothelioma Advocate offers their free services to US Navy Veterans with mesothelioma in Kansas City, St. Louis, Independence, Columbia, Lee’s Summit, O’Fallon, St. Joseph or anywhere in Missouri. https://Missouri.USNavyMesothelioma.Com

For the best possible mesothelioma treatment options in Missouri the Missouri US Navy Veterans Mesothelioma Advocate strongly recommends the following heath care facilities with the offer to help a diagnosed victim, or their family get to the right physicians at each hospital:

*Barnes Jewish Hospital Saint Louis, Missouri:https://www.barnesjewish.org

*Saint Louis University Cancer Center Saint Louis, Missouri:Saint Louis University Cancer: https://www.slucare.edu

*The Missouri Medical Cancer Institute: http://www.mmc.org/cancer-institute

About one third of all US citizens diagnosed with mesothelioma each year are Veterans of the US Navy. Before a Navy Veteran with mesothelioma or their family retain the services of a lawyer or law firm, they are urged to call the US Navy Veterans Mesothelioma Advocate anytime at 800-714-0303. https://USNavyMesothelioma.Com

The states with the highest incidence of mesothelioma include Maine, Massachusetts, Connecticut, Maryland, New Jersey, Pennsylvania, Ohio, West Virginia, Virginia, Michigan, Illinois, Minnesota, Louisiana, Washington, and Oregon. www.karstvonoiste.com/

For a listing of various classes of US Navy ships or submarines please visit the US Navy website on this topic: https://www.navy.mil/navydata/our_ships.asp.

For more information about mesothelioma please refer to the National Institutes of Health’s web site related to this rare form of cancer: https://www.cancer.gov/types/mesothelioma

Michael Thomas
Missouri US Navy Veterans Mesothelioma Advocate
+1 800-714-0303
email us here


Source: EIN Presswire

How accurate is the testing in your lab results? : Lab Testing Vs. THC Test Kits

thc test kit

Testing kits come in 3 sizes, refills available

THC, CBD testing charts

Potency and finger print charts

MEDFORD, OREGON, UNITED STATES, October 29, 2019 /EINPresswire.com/ — Whether you are a grower or a consumer you need to recognize that the testing in laboratories are effective or not; do they offer you accurate results? Do they follow the standard guidelines?

Most people assume that if they take something to a laboratory to be tested whatever it is, they expect that the results obtained would be precise or truthful as well as stand high as compared to any other testing method. Unfortunately, their assumption is completely wrong! Till date there are numerous examples of labs giving inaccurate results and even it is found that one lab giving one outcome and another lab using the same sample giving a different outcome.

Due to high demand of Hemp testing, the people executing lab tests do not have proper experience or enough training to test the samples in the laboratory correctly. Most importantly, each testing machine in the laboratory should be calibrated after each sample test so that the baseline sample can offer you a precise outcome of your sample as compared to their baseline they purchased. Does your neighboring laboratory re-calibrate the testing machines after ever sample tested; verify if it is regularly done.

What happens in a Laboratory Testing?

Laboratories execute a diverse type of testing:
• Thin Layer Chromatography (TLC)-
• High Performance Liquid Chromatography (HPLC)
• Gas Chromatography (GC)

Fundamentally, there is no regular process from lab to lab for testing the medical Marijuana plants since there is lack of standard testing rules by the government. The Procedure varies from Lab to Lab as the test of the sample do.

3 Most Common kinds of Laboratory Testing:

• Thin Layer Chromatography (TLC)- (type of kit we offer)

It is the widely used chromatography technique that is utilized to take apart chemical compounds. It entails a stationary stage consisting of a slight layer of adsorbent substance. These thin layers typically include silica gel, aluminum oxide, or else cellulose immobilized onto a flat, inert mover sheet. It has a liquid phase that is consist of solutions to be separated dissolving in an appropriate solvent to it and is strained through the plate by means of capillary action, separating experimental solution, whereas TLC can be organized for quantitative work

• High Performance Liquid Chromatography (HPLC)

HPLC is a form of column chromatography that is frequently utilized in analytical chemistry. It is used to take apart constituents of a mixture by using a variety of chemical interfaces between the compounds within the substance being examined as well as the chromatography column.

• Gas Chromatography (GC)

It is a chemical analysis instrument used for separating volatile and semi-volatile compounds in an intricate sample. The stationary phase in GC encompasses a narrow-bored column and the mobile phase is a gas. The volatile, as well as non-volatile constituents of a sample mix, are taken apart based on their changeable partition actions between the mobile phase as well as the stationary segment.

The Reality Check

The GC testing method is in many cases no more accurate as our testing method. It is not as good in many cases as we would like for testing the sample of CBD, CBN, CBG, as well as some other materials in marijuana since the machines, utilize heat to test these substances and some will evaporate at a lower temperature than THC.

On the other hand, HPLC testing method is difficult and does perform cold testing but if you are looking for the highest THC percentage then you must let your sample undergo HOT and COLD test which most machines are not ready to do in the laboratory. Calibrations of these machines are also highly essential which is overlooked by many of the laboratories leading to contamination and degradation problems.

THC Test Kit: TLC Lab Supply’s Method of Testing

THC test kits are Thin Layer Chromatography analyzing kits that are specifically designed for testing medical marijuana plants sometimes referred as HPTLC. Our testing kit is patented as well as indexed product, as well as qualified by the University of Leiden.

It is an easy, rapid and inexpensive method that offers a quick answer as to how many components are there in a mixture. TLC method is also utilized to support the identification of a compound in a mix when the Rf of a compound is compared with the Rf from the literature, in our testing kit the cannabinoids can be recognized by their definite color and detailed location as well as order of emergence on the TLC Plate, if passed out with the solvent system from the kit.

What is a TLC plate? How does it work?

Typically, it is a sheet of glass which is layered with a thin layer of a solid adsorbent, silica.
• A little amount of mixture to be tested is spotted near the bottom line of this plate
• Then the TLC plate is positioned in a shallow of a solvent in a developing chamber so that only the most bottom part of the plate is in the liquid
• This liquid is the mobile segment and gradually ascends up the TLC Plate by action of the capillaries
• An equilibrium is founded for each constituent of the mixture between the molecules which are absorbed and which are in the solution
• In principle, the constituents will differ in solubility as well as in the potency of the adsorption to the adsorbent and the constituents will passed further up to the plate than the others
• After drying, the alienated constituents is now separated in the silica plates, it will be visualized by spraying the plate with a dye
• The coloring is extremely definite for cannabinoid and every primary cannabinoid will display their own color

Testing medical marijuana and Hemp plants with our TLC test kits is a good step in providing a balanced product that conveys a way for growers as well as product producers to examine their products during production.

Roger Green
TLC Lab Supply
+1 541-690-1000
email us here
Visit us on social media:
Facebook
Twitter
LinkedIn


Source: EIN Presswire

Micromeritics introduces the Selective Adsorption Analyzer 8100

Micromeritics Selective Adsorption Analyzer 8100 (SAA – 8100)

Micromeritics

Delivering precise performance characterization for next generation adsorbents

NORCROSS, GEORGIA, UNITED STATES, October 29, 2019 /EINPresswire.com/ — Micromeritics Instrument Corp., a global leader in material characterization technology, has introduced the new Selective Adsorption Analyzer 8100 (SAA-8100), a flexible gas delivery and management system for the precise characterization of adsorbent performance under process relevant conditions. Combining Micromeritics’ widely recognized knowledge of gas adsorption with the tried and tested technology of PID Eng and Tech, a company recently acquired by Micromeritics and renowned for its microreactor and pilot plant technology, it delivers reliable, selective adsorption data for gas/vapor mixtures by mass balance. A highly efficient tool for evaluating the performance of next generation adsorbents, the SAA 8100 is particularly valuable for researchers working in fields such as gas separation, storage and purification, carbon dioxide capture and energy storage.

Adsorbents are defined by their selectivity and capacity for a specific component. Quantifying transient and equilibrium adsorption behavior using relevant gas/vapor mixtures, at commercially relevant temperatures and pressures is therefore essential. Breakthrough analysis, measurement of the concentration of the component of interest at the exit of an adsorption bed as a function of time, is one of the primary ways of gathering this information.

The SAA-8100 incorporates precision mass flow controllers and proprietary, high performance blending valves from PID Eng and Tech. The resulting gas delivery system has minimal dead volume and ensures the precise control of both composition and flow rate. Adsorbent is held in a simple column that uses only 0.05 – 5 g of sample per measurement. A hot box provides accurate, uniform temperature control of the column, column, up to 200°C, with no cold spots. Sample activation up to 1,050°C can be carried out using the software-controlled furnace. Operating pressures can be controlled from atmospheric to 30 bar via a back-pressure valve. The gas detection system and other features such as vapor generation are readily customized for the application(s) of interest.

With the SAA-8100 generating accurate breakthrough curves under well-controlled conditions is simple and straightforward. A wealth of other characterization strategies can also be applied including mixed gas adsorption studies, competitive adsorption assessments, and high-pressure isotherm generation. Vapor generating options are available for those that require them. By exploiting these test capabilities researchers can accelerate new adsorbents into commercial use with efficiency and confidence.

Find out more about the SAA-8100 here https://www.micromeritics.com/Product-Showcase/Selective-Adsorption-Analyzer-SAA-8100.aspx

About Micromeritics Instrument

Micromeritics Instrument Corporation is a global provider of solutions for material characterization with best-in-class instrumentation and application expertise in five core areas: density; surface area and porosity; particle size and shape; powder characterization; and catalyst characterization and process development.
The company is headquartered in Norcross, Georgia, USA and has more than 400 employees worldwide. With a fully integrated operation that extends from a world-class scientific knowledge base through to in-house manufacture, Micromeritics delivers an extensive range of high-performance products for oil processing, petrochemicals and catalysts, to food and pharmaceuticals, and works at the forefront of characterization technology for next-generation materials such as graphene, metal-organic-frameworks, nanocatalysts, and zeolites. Under its premium brand Particulate Systems, Micromeritics discovers and commercializes innovative material characterization technologies that are complementary to core product lines. Cost-efficient contract testing is offered via its laboratory Particle Testing Authority (PTA).

The strategic acquisitions of Freeman Technology Ltd and Process Integral Development S.L. (PID Eng & Tech) reflect an ongoing commitment to optimized, integrated solutions in the industrially vital areas of powders and catalysis.

For additional information visit micromeritics.com

Peter Nasca
Persistence PR, LLC
+1 954-557-2966
email us here


Source: EIN Presswire

NEW SafeSonic 25-L Level Sensor

Class 1, Div. 1 Level and Distance Sensor

Ultrasonic Level and Distance Sensor

Ultrasonic Level and Distance Sensor

Senix Level and Distance Sensors

Loop Powered Ultrasonic Level and Distance Sensor for Class I Division 1 Hazardous Areas

Your team is by far one of the best suppliers we’ve had the pleasure to deal with.”

— Murray Irrigation

HINESBURG, VERMONT, USA, October 28, 2019 /EINPresswire.com/ — The Senix SafeSonic ultrasonic level transmitter is intrinsically safe (IS) and CSA rated for Class I Division 1 hazardous areas in the US and Canada. It has a maximum range of 25 feet (7.62 meters) and is typically used for tank level measurement but can also be used for other hazardous area applications such as measuring the roll diameter on coating machinery. The transmitter sensing element is chemically resistant, and the electrical connection is a two-wire loop-powered 4-20 mA output. The SafeSonic 25-L is pre-calibrated from 1 and 25 feet but can be user-calibrated to other ranges using optional accessories.

* Intrinsically safe design
* Two-wire, 4-20 mA current loop powered
* Top or bottom NPT mounting threads
* Chemically resistant PVDF lower body
* Potted for wet and dirty applications
* Ruggedized piezoelectric ultrasonic transducer
* UV resistant, potted-in cable or 4-pin M12 connector*
* Certified for hazardous environments in US & Canada
* Can be used to measure many liquid chemicals
* Non-contact measurement
* Reliable operation in wet and dirty environments
* Low energy and low wiring cost
* Simple mounting with standard threads

Tim Cetto
Senix
+1 802-489-7300
email us here


Source: EIN Presswire

Registration opens for SMi’s AI in Drug Discovery Conference 2020

AI in Drug Discovery 2020

AI in Drug Discovery Conference 2020

SMi Reports: Registration is open for SMi’s inaugural AI in Drug Discovery conference taking place in London in March 2020.

LONDON, UNITED KINGDOM, October 28, 2019 /EINPresswire.com/ — SMi is delighted to announce the highly anticipated AI in Drug Discovery conference which will commence on 16th-17th March in London. AI machine learning technologies have the potential to reduce drug discovery costs by an estimated US$70 billion over the next decade, and is therefore leading the way to shorter, cheaper and more successful research and development.

Unfortunately, there can be no AI revolution without first tackling data challenges, such as the lack of consistent and quality data. It is critical, therefore, for industry leaders to come together and discuss strategies to overcome this problem and further advance research in drug discovery.

This two-day agenda offers networking opportunities with VPs, heads, managers, directors and scientists within artificial intelligence, machine learning, drug discovery, R&D, medicinal chemistry, cheminformatics, molecular AI and other related industries.

Registration is live on the website and an early bird saving of £400 is available for bookings made before 29st November 2019: www.AI-indrugdiscovery.com/EIN1

Key topics will include:

• Case studies from industry leaders in pharmaceuticals and biotechnology who have incorporated AI into their work.
• How deep learning methods can be used for compound screening, de novo design, multiparameter optimization and more.
• Strategies for overcoming data-related challenges and data access.
• Unique approaches such as fragment-based and network-driven drug discovery.

Key speakers attending:

Chair:

• Alexander Hillisch, Director, Medicinal Chemistry, Head of Computational Chemistry, Bayer

Featured speakers:

• Andrea Pierleoni, Head of Artificial Intelligence, Healx Limited
• Andreas Bender, Lecturer for Molecular Informatics, University of Cambridge
• Andrew Leach, Head of Chemistry Services, EMBL-EBI
• Christian Tyrchan, Teamleader Computational Chemistry, AstraZeneca Sweden
• Christine Richardson, Principal Scientist, Computational Chemistry, Domainex
• Darren Green, Director of Molecular Design, GSK
• Friedemann Schmidt, Senior Scientist, Preclinical Safety, Sanofi
• Friedrich Rippmann, Director, Global Computational Chemistry & Biology, Merck
• Gerhard Hessler, Head of Synthetic Molecular Design, Sanofi
• Govinda Bhisetti, Head of Computational Chemistry, Biogen
• Graham Smith, Senior Medical Chemist, AstraZeneca
• John Overington, Drug Discovery Informatics, Medicines Discovery Catapult

There will also be a post-conference workshop on 18th March:
Practical Application of Predictive Properties in Drug Design

For the full agenda and speaker line-up, the brochure is available to download online. Register at www.AI-indrugdiscovery.com/prcom1

AI in Drug Discovery Conference 2020
16th-17th March 2020
London, UK

— ENDS –
Contact Information:
For media enquiries, contact Jinna Sidhu on Tel: +44 (0)20 7827 6088 or hsidhu@smi-online.co.uk

About SMi Group:
Established since 1993, the SMi Group is a global event-production company that specializes in Business-to-Business Conferences, Workshops, Masterclasses and online Communities. We create and deliver events in the Defence, Security, Energy, Utilities, Finance and Pharmaceutical industries. We pride ourselves on having access to the world’s most forward-thinking opinion leaders and visionaries, allowing us to bring our communities together to Learn, Engage, Share and Network. More information can be found at http://www.smi-online.co.uk

Jinna Sidhu
SMi Group
+44 (0) 207 827 6088
email us here


Source: EIN Presswire

Exclusive interview from conference speaker Richard Marsden released ahead of SMi’s Respiratory Drug Delivery Conference

Respiratory Drug Delivery2019

Exclusive interview with industry expert Richard Marsden, CEO of Synairgen, ahead of the upcoming Respiratory Drug Delivery conference this December.

LONDON, UNITED KINGDOM, October 28, 2019 /EINPresswire.com/ — Respiratory diseases such as asthma, COPD and cystic fibrosis are rising in prevalence, and this group of diseases are now among the leading cause of death. As such, there is a pressing need for a forum which examines new technologies for improved respiratory drug delivery strategies.

SMi’s Respiratory Drug Delivery conference, taking place on 5th – 6th December in London, will bring together pharmaceutical experts, clinical researchers and drug manufacturers in respiratory science to analyse the success of digital medical devices and connective health technology in aiding the diagnosis of severe asthma and COPD, and discuss the current research and developments on long-term treatments.

During the run-up to the 2019 conference, SMi interviewed industry expert and conference speaker Richard Marsden, CEO of Synairgen. Here is a snapshot of what was discussed:

The Respiratory market has matured greatly over recent years, what key differences have you noticed in the last year regarding significant developments?

“I believe there has been a lot of optimization and fine-tuning in the anti-inflammatory and bronchodilator space, however, it is a very competitive area and there has been less reward for pharmaceutical companies in this space. Infection is still a major problem in COPD and there is a potentially large reward for breakthrough products in this area.”

Do you think collaborations are main drivers of the RDD field?

“I think that collaborations are vital, they are the life and blood of the industry. We have many collaborations with academic groups and aim to for a partnership with a larger pharmaceutical company, once this clinical trial is complete.”

How would you like to see the market developing in the future?

“I believe there is still substantial clinical need in the respiratory space, and it will take novel programs to generate the breakthroughs required to help patients, payers, and ultimately, to provide a return on investment for industry.”

The full version of the interview and event brochure are available to download online at
www.respiratorydrugdelivery.com/EINpr7

Richard Marsden will be presenting on “Transforming disease management through inhaled and biologic treatments, drug combinations and devices.”

• Examining how new, inhaled drug modalities could help us achieve early intervention.
• Exploring new technology and emerging modalities that play an increasing role in the drug modality toolbox.
• Boosting collaboration with leading biotech companies around the world in order to uncover new potential drug targets and pathways.

Respiratory Drug Delivery 2019
Main Conference: 5th – 6th December 2019
Location: Copthorne Tara Hotel, London, UK

For sponsorship enquiries please contact Alia Malick on +44 (0)20 7827 6168.

For delegate enquiries contact Kieran Ronaldson on +44 (0)20 7827 6744.

For all media inquiries contact Jinna Sidhu on Tel: +44 (0)20 7827 6088 / Email: hsidhu@smi-online.co.uk

About SMi Group:
Established since 1993, the SMi Group is a global event-production company that specializes in Business-to-Business Conferences, Workshops, Masterclasses and online Communities. We create and deliver events in the Defence, Security, Energy, Utilities, Finance and Pharmaceutical industries. We pride ourselves on having access to the world's most forward-thinking opinion leaders and visionaries, allowing us to bring our communities together to Learn, Engage, Share and Network. More information can be found at http://www.smi-online.co.uk

Jinna Sidhu
SMi Group
+44 (0) 207 827 6088
email us here


Source: EIN Presswire

Ductile Iron Pipe Market 2019 Global Industry Demand, Sales, Suppliers, Analysis and Forecasts to 2025

Wiseguyreports.Com Publish New Market Research Report On -“Ductile Iron Pipe Market 2019 Global Analysis, Size, Share, Trends and Growth, Forecast 2025”

PUNE, INDIA, October 28, 2019 /EINPresswire.com/ —

Ductile Iron Pipe Market 2019

The term Ductile Iron Pipe refers to the pipe that is made up of ductile cast iron. The Ductile Iron Pipe is commonly used for the potable distribution and transmission of water. The Ductile Iron Pipe is one of the direct developments of the earlier used cast iron pipe which the Ductile Iron Pipe has superseded. For the manufacturing the Ductile Iron Pipe, the ductile iron is used. The Ductile Iron Pipe is manufactured by the spheroidal and modular nature of the graphite in the iron. The Ductile Iron Pipe is manufactured by the centrifugal casting process of the metal and resin lined molds. The Ductile Iron Pipe that is manufactured in the United States of America has been a certified and sustainable product that has been recognized by the Institute for Market Transformation to Sustainability.

Market Segment by top players, this report covers
Saint-Gobain
Kuboat
US PILE and Foundry company
Jindal SAW
Electro-steel Steels
Mcwane
AMERICAN Cast Iron Pipe Company
Kurimoto
Xinxing Ductile Iron Pipes
Benxi Beitai
Rizhao Zhufu
Angang Group Yongtong
Shandong ductile pipes
Shanxi Guanghua
SUNS
Jiangsu Yongyi

Request Free Sample Report @ https://www.wiseguyreports.com/sample-request/3079584-global-ductile-iron-pipe-market-research-report-2018

Market Segmentation of the Global Ductile Iron Pipe Market
The applications of the Global Ductile Iron Pipe Market has mainly been segmented into,
Drinking-Water Distribution- The Ductile Iron Pipe is a primary source of distribution of drinking water to the residential as well as the commercial places. The Ductile Iron Pipe is very helpful in providing pure drinkable to people.

Wastewater – The Ductile Iron Pipe is also used in the process of providing the cleanliness of the cities by evacuating the wastewater out of the places through them.

Irrigation- The Ductile Iron Pipe provides its role as a backbone to the agricultural industry by proving the farmers' adequate water for their fields from farther water sources through them.

Mining – Not only for the irrigation purposes but the Ductile Iron Pipe also provides its support to the mining industry with a variety of its uses.

Gas & Oil Supply- The Ductile Iron Pipe is also used for a major purpose of transporting oil and gas from one place to the other. It provides extra benefit as the transportation cost by other means is reduced in this process.
Major Geographical Regions of the Global Ductile Iron Pipe Market

Based on the region, the Global Market of the Ductile Iron Pipe includes the United States of America, from North
America. Germany, France, United Kingdom, Italy, Spain, Poland, and Russia from Europe. China, Japan, South Korea, India, Indonesia, Singapore, Thailand, Malaysia, Philippines, Vietnam, and Australia from Asia-Pacific. Brazil, Mexico, and Colombia from Central & South America. And Turkey, Egypt, South Africa, Saudi Arabia, United Arab Emirates, and GCC Countries from the Middle East & Africa.

Industry Insights
The Global Ductile Iron Pipe Market size is said to increase convincingly by the year 2025, with a Compound Annual Growth Rate (CAGR) that is going to grow at a higher alarming rate during its forecast period. The Global Ductile Iron Pipe Market was recorded to be a much lower amount than its prediction in the year 2018. In this study, the base year that has been considered is 2017 and 2018 to 2025 has been considered the forecast period to estimate the size of the market for the Global Ductile Iron Pipe Market.

Complete Report Details @ https://www.wiseguyreports.com/reports/3079584-global-ductile-iron-pipe-market-research-report-2018

Table of Contents –Analysis of Key Points
Market Overview
Manufacturers Profiles
Global Ductile Iron Pipe Sales, Revenue, Market Share and Competition by Manufacturer (2017-2018)
Ductile Iron Pipe Global Market Analysis by Regions
North America Ductile Iron Pipe by Country
Europe Ductile Iron Pipe by Country
Asia-Pacific Ductile Iron Pipe by Country
South America Ductile Iron Pipe by Country
Africa and Middle East Ductile Iron Pipe by Countries
Ductile Iron Pipe Global Market Segment by Type
Ductile Iron Pipe Global Market Segment by Application
Ductile Iron Pipe Market Forecast (2019-2025)
Sales Channel, Distributors, Traders and Dealers
Research Findings and Conclusion
Appendix
List of Tables and Figures
Continued…..

Norah Trent
wiseguyreports
646 845 9349 / +44 208 133 9349
email us here


Source: EIN Presswire

Specialty Oils & Fats Market 2019 Global Industry – Key Players Analysis, Sales, Supply, Demand and Forecast to 2023

Wiseguyreports.Com Publish Market Report On -“Specialty Oils & Fats Market 2019 Global Analysis, Size, Share, Trends, Opportunities and Growth, Forecast 2023”

PUNE, INDIA, October 28, 2019 /EINPresswire.com/ —

Specialty Oils & Fats Market 2019

International Speciality Oils and Fats market has been thoroughly analyzed by the report. Specifically, the growth rate between 2016 and 2022 has been analyzed in the report. At the same time, figuring out the growth rate in the present scenario, the report predicts the growth forecast of the future. Upon going through the report, the driving factors of specialty oils and fats market can be figured out. It analyses the impact of these factors on the overall market. At the same time, one can also understand the level of competition or the level of challenges involved in specialty oils and fats market, in specific markets as well as in the global scenario

Market Segment by top players, this report covers
Cargill
Wilmar
IOI Group
Premium Vegetable Oils Sdn Bhd
Fuji Oil Co., Ltd
ISF
Gold Coast
41Olive
IFFCO
ADM
Liberty
Batory Foods
Musim Mas
AAK AB
Olenex
Mewah Group

Request Free Sample Report @ https://www.wiseguyreports.com/sample-request/2332540-global-specialty-oils-fats-market-research-report-2017

The overall specialty oils and fats market, has been analyzed in terms of production level, consumption rate, as well as the revenue generated. It provides the market share report of the key players and predicts the growth rate as well. Analysis of the report encompasses the scenario between the years 2012 to 2022.
Going through the report, the competition scenario of international specialty oils and fats market can be thoroughly analyzed.

In this context, it identifies the key manufacturers and speculates their revenue generation capacity. The key player thus identified in the report includes the names like Cargill, Wilmar, IOIgroup, ISF, Gold Coast, IFFCO, ADM, Liberty,41 Oilive, etc. The report provides the status of each segment and analyses the sales consumption capacity, including the share in the market of key players and their growth rate. Ultimately, it can be claimed that the report provides a wholesome scenario of the market from all perspectives.

Regional analysis:
From geography or regional perspectives, the specialty oils and fats market can be basically divided into zones like North America, Europe, China, Japan, India, and South Asia. Through the report, one can get to know about the scenario of the market at all the key domains, for the specific key player/players. In this context, it analyses their present status and takes forecast into their status a few years past. Moreover, the analysis is provided in reference to the past years.

Segmentation:
In terms of product type, the market can be segmented into Speciality Oils segment and Speciality Fats segment. It means the entire specialty oils and fats market can simply be divided into a couple of types. Through the analysis, various aspects, starting from the production level, revenue generated, market share, growth rate, etc., have been analyzed. The overall market of speciality oils and fats market has been segmented in terms of user base and application types as well. In this context, it is divided into Household, Restaurant, industries, and other segments.

News from the industry:
As per the report published by News Stoner, the Speciality fats and oils market is speculated to touch 142.1 US billion dollars by the year 2026. This noteworthy growth is said to be the outcome of creative business strategies presented by the top players of the industry.

Complete Report Details @ https://www.wiseguyreports.com/reports/2332540-global-specialty-oils-fats-market-research-report-2017

Table of Contents –Analysis of Key Points

Market Overview
Manufacturers Profiles
Global Specialty Oils & Fats Sales, Revenue, Market Share and Competition by Manufacturer (2017-2018)
Specialty Oils & Fats Global Market Analysis by Regions
North America Specialty Oils & Fats by Country
Europe Specialty Oils & Fats by Country
Asia-Pacific Specialty Oils & Fats by Country
South America Specialty Oils & Fats by Country
Africa and Middle East Specialty Oils & Fats by Countries
Specialty Oils & Fats Global Market Segment by Type
Specialty Oils & Fats Global Market Segment by Application
Specialty Oils & Fats Market Forecast (2019-2025)
Sales Channel, Distributors, Traders and Dealers
Research Findings and Conclusion
Appendix
List of Tables and Figures
Continued…..

Norah Trent
wiseguyreports
646 845 9349 / +44 208 133 9349
email us here


Source: EIN Presswire