LAT Water details waste-heat evaporation approach for PFAS wastewater
LAT Water Technologies has published a technical note on using waste-heat-driven evaporation to reduce PFAS in industrial wastewater. The note lands as European and UK regulators intensify pressure on forever chemicals and as treatment operators look for lower-cost ways to handle contaminated waste streams.
Why it matters: - PFAS are persistent chemicals that do not break down in the environment. - PFAS contamination is now a major water-treatment challenge across manufacturing, surface treatment, waste management, airports and defence sites. - Most conventional treatment does not remove PFAS, while capture methods still leave spent media or concentrated waste streams that need further handling. - LAT Water Technologies is positioning evaporation as a way to reduce the cost burden before final destruction or disposal.
What happened: - LAT Water Technologies published a technical note on applying its waste-heat-driven evaporative process to PFAS in industrial wastewater. - The note explains how the process uses low-grade waste heat to recover clean water from contaminated streams. - The company says the approach leaves a much smaller residue that is easier to manage. - The technical note is available here.
The details: - The process is designed to recover clean water from PFAS-contaminated wastewater. - LAT Water Technologies says the remaining waste stream is reduced to a far smaller residue after evaporation. - The company says destruction technologies are costly per litre treated. - LAT Water Technologies argues that shrinking the volume first can make downstream destruction more practical. - In the note, Jozef Wallis, VP Commercial EMEA at LAT Water Technologies, said: "PFAS treatment is largely a volume problem. If you recover the clean water and shrink what remains to a fraction of the original volume, the cost of destroying it falls sharply." - PFAS are often called forever chemicals because they persist in the environment.
Between the lines: - Regulatory pressure is rising in Europe, which could accelerate demand for treatment options that reduce PFAS volumes before disposal. - In March 2026, both of the European Chemicals Agency's scientific committees supported an EU-wide restriction on PFAS covering more than 10,000 substances. - The final socio-economic opinion is expected by the end of 2026. - The UK government published its PFAS Plan in February 2026. - The timing suggests LAT Water Technologies is trying to position its process as a practical step between contaminated effluent and final destruction.
What's next: - The European Chemicals Agency is expected to publish its final socio-economic opinion by the end of 2026. - Regulators and industrial operators are likely to face more pressure to identify scalable PFAS treatment pathways. - LAT Water Technologies is likely to continue pitching evaporation as a lower-volume, lower-cost front end to PFAS destruction.
The bottom line: - LAT Water Technologies is betting that the cheapest way to deal with PFAS is to remove water first and cut the waste stream down before destruction.
Disclaimer: This article was produced by AGP Wire with the assistance of artificial intelligence based on original source content and has been refined to improve clarity, structure, and readability. This content is provided on an “as is” basis. While care has been taken in its preparation, it may contain inaccuracies or omissions, and readers should consult the original source and independently verify key information where appropriate. This content is for informational purposes only and does not constitute legal, financial, investment, or other professional advice.
Sign up for:
Chemicals Press Releases
The daily local news briefing you can trust. Every day. Subscribe now.
Check Your Email!
We sent a one-time activation link to: .
Confirm it's you by clicking the email link.
If the email is not in your inbox, check spam or try again.
Welcome back!
is already signed up. Check your inbox for updates.